News
Breaking: The Ministry of Housing and Urban-Rural Development and the National Development and Reform Commission have issued a document calling for the electrification of heating, hot water, and cooking, and for the promotion of products that replace gas.
On July 13, 2022, the Ministry of Housing and Urban–Rural Development and the National Development and Reform Commission issued the “Notice on the Issuance of the Implementation Plan for Peaking Carbon Emissions in the Urban–Rural Construction Sector.”
The Plan addresses issues such as optimizing the energy consumption structure in urban development, with the overarching goal of promoting electrification, while also calling for the widespread adoption of alternative products to natural gas.
1. Accelerate the upgrading and renovation of urban gas pipelines and related infrastructure.
2. Guide the electrification of building heating, domestic hot water, and cooking, with electricity accounting for more than 65% of total building energy consumption by 2030.
2. Promote the full electrification of newly constructed public buildings, achieving an electrification rate of 20% by 2030.
3. Promote alternative products such as heat-pump water heaters and high-efficiency electric stoves, and advance the adoption of high-efficiency DC appliances and equipment.
4. Promote further increases in rural electrification, and encourage the electrification of energy uses such as cooking, heating, lighting, transportation, and hot water. Make full use of solar thermal systems to provide domestic hot water, and encourage the adoption of solar cookers and other similar devices.
From a broad perspective, the full electrification of future lifestyles is very likely an inevitable trend. However, the gas industry has no need to panic: the widespread adoption of electrification hinges on sufficient electricity generation capacity, affordable generation costs, and manageable emissions—areas where we still have a considerable way to go at present.
Moreover, residents’ daily habits aren’t something that can be changed overnight—after all, the simple joys of everyday life are what truly soothe the human heart.
Lacking a touch of everyday warmth is like losing a piece of the soul of Chinese culture.
---------------------------------
Implementation Plan for Peaking Carbon Emissions in the Urban–Rural Construction Sector (Excerpt)
Urban and rural development is one of the major sectors contributing to carbon emissions. As urbanization accelerates and the industrial structure undergoes profound restructuring, both the absolute level of carbon emissions in this sector and its share of total national emissions are expected to rise further. To thoroughly implement the decisions and arrangements of the CPC Central Committee and the State Council on achieving carbon peaking and carbon neutrality, to curb the growth of carbon emissions in the urban and rural construction sector, and to ensure effective progress toward carbon peaking in this field, this Implementation Plan has been formulated in accordance with the “Opinions of the CPC Central Committee and the State Council on Fully, Accurately, and Comprehensively Implementing the New Development Philosophy and Doing a Good Job in Carbon Peaking and Carbon Neutrality” and the “Action Plan for Reaching Carbon Peak Before 2030.”
(8) Enhance the operational efficiency of infrastructure.
In light of urban characteristics and with full respect for nature, we will strengthen the seamless integration of urban infrastructure with existing rivers, lakes, and other ecological features. Tailoring approaches to local conditions, we will systematically advance sponge city development across all areas, comprehensively adopting measures such as infiltration, detention, storage, purification, reuse, and drainage, while expanding rainwater retention and utilization. By 2030, the average proportion of permeable surfaces in built-up urban areas nationwide will reach 45%. We will promote water‑saving city development by upgrading and renovating aging urban water supply networks, implementing district‑based metering, and enhancing the intelligent management of water distribution systems, striving to keep urban public water supply network leakage below 8% by 2030. We will also carry out upgrades to wastewater collection and treatment facilities and launch initiatives to promote the resource‑based utilization of urban wastewater, aiming to achieve a national average reclaimed water utilization rate of 30% in cities by 2030. Furthermore, we will accelerate the renewal and modernization of urban gas pipelines and related infrastructure. We will advance green lighting in cities, strengthening comprehensive management throughout the planning, design, construction, and operation phases to curb excessive illumination and light pollution. By 2030, the share of high‑efficiency, energy‑saving lighting technologies such as LEDs will exceed 80%, and more than 30% of cities will have implemented digitalized lighting management systems. Finally, we will launch initiatives to enhance urban landscaping and greening, improve the urban park system, develop greenway networks in central and historic districts, expand vertical greening, and increase the use of native and locally adapted plant species. By 2030, the green space ratio in built-up urban areas will reach 38.9%, and the length of greenways per 10,000 residents in these areas will exceed 1 kilometer.
(9) Optimize the energy consumption structure of urban development.
Promote the integrated development of solar photovoltaic systems in buildings, aiming to achieve a 50% rooftop PV coverage rate for newly constructed public‑institution buildings and factory rooftops by 2025. Encourage the retrofitting of existing public‑building rooftops with solar PV systems. Accelerate the deployment of smart PV applications. In regions with abundant solar resources and in buildings with stable hot‑water demand, actively advance the use of solar thermal technologies in building applications. Tailor approaches to local conditions to promote the utilization of geothermal and biomass energy, and widely deploy air‑source and other electric heat‑pump technologies. By 2025, the renewable‑energy substitution rate in urban buildings will reach 8%.
Guide the electrification of building heating, domestic hot water, and cooking, with electricity accounting for more than 65% of total building energy consumption by 2030. Promote the full electrification of new public buildings, achieving an electrification rate of 20% by 2030.
Promote alternative products to gas, such as heat-pump water heaters and high-efficiency electric stoves, and advance the adoption of high-efficiency DC appliances and equipment.
Promote decarbonization at the heat‑supply end of buildings by comprehensively utilizing waste heat from combined heat and power, industrial processes, and nuclear power, while maximizing its application in accordance with local conditions. Fully leverage urban CHP capacity and enhance the integration of biomass with urban CHP systems. In cold regions, guide the adoption of ultra‑low‑energy‑consumption buildings that no longer rely on municipal district heating.
(15) Promote the application of renewable energy.
Promote the application of renewable energy sources—such as solar, geothermal, air‑source heat, and biomass—in rural areas for gas supply, heating, and electricity. Vigorously encourage the installation of solar photovoltaic systems on rooftops, in courtyard open spaces, and on agricultural facilities. Further enhance electrification in rural areas, and promote the electrification of energy uses including cooking, heating, lighting, transportation, and hot water. Make full use of solar thermal systems to provide domestic hot water, and encourage the adoption of solar cookers and similar devices.