News
Enterprises must be aware of this policy; otherwise, they will be unable to commence production.
On November 29, the Shandong Provincial Department of Ecology and Environment drafted the “Measures for Carbon Emission Reduction and Replacement in High-Energy-Consuming and High-Emission Construction Projects of Shandong Province (Trial).”
The document stipulates that, for the “six major high‑energy‑consumption industries,” new investment projects in the upstream primary processing and high‑energy‑consumption, high‑emission stages of 16 sectors—namely coal‑fired power, refining and petrochemicals, coking, steel, cement, ferroalloys, electrolytic aluminum, methanol, chlor‑alkali, calcium carbide, acetic acid, nitrogen fertilizers, lime, flat glass, architectural ceramics, and asphalt waterproofing materials—must undergo carbon‑emission reduction substitution. Projects whose allocated carbon‑emission reduction targets have not been secured shall be prohibited from commencing operations.
This means that when launching new high‑energy‑consumption, high‑emission projects, the equivalent‑amount carbon‑emission substitution must be fully implemented; otherwise, the project will be barred from going into operation.
Main text:
Provisional Measures for Carbon Emission Reduction and Replacement in High-Energy-Consuming and High-Emission Construction Projects of Shandong Province
Article 1: In order to thoroughly implement the spirit of documents including the “Opinions of the CPC Central Committee and the State Council on Winning the Battle Against Pollution,” the “Notice of the State Council on Issuing the Action Plan for Peaking Carbon Emissions Before 2030,” and the Ministry of Ecology and Environment’s “Notice on Conducting a Pilot Program for Environmental Impact Assessment of Carbon Emissions in Key Industry Construction Projects,” and to fulfill the deployment requirements of the Provincial Party Committee and the Provincial Government to resolutely curb the blind expansion of “high‑carbon and high‑energy‑consumption” projects, these Measures are hereby formulated.
Article 2 This Measures shall apply to new investment projects in the upstream primary processing and high‑energy‑consumption, high‑emission segments of the 16 industries—namely coal‑fired power, refining and petrochemicals, coking, steel, cement, ferroalloys, electrolytic aluminum, methanol, chlor‑alkali, calcium carbide, acetic acid, nitrogen fertilizers, lime, flat glass, architectural ceramics, and asphalt waterproofing materials—that are explicitly identified in the “Notice of the General Office of the People’s Government of Shandong Province on Issuing Several Measures to Resolutely Curb the Blind Development of ‘Two High’ Projects” (Lu Zheng Ban Zi [2021] No. 98). Such projects exclude technical transformation initiatives that do not increase production capacity, including those involving environmental protection and energy conservation, safety‑facility upgrades, or product‑quality improvements.
Article 3. Carbon emission reduction and substitution refers to the requirement that any additional carbon emissions generated by a proposed project must be offset through alternative sources, thereby reducing overall carbon emissions. The carbon emissions reduced by these alternative sources include:
(1) Carbon emissions reduced due to enterprise closures or production conversions;
(2) Carbon emissions reduced through the phasing out of outdated production capacity, the curtailment of excess capacity, or energy-saving technological upgrades;
(3) The carbon emissions reductions achieved by the project proponent through the substitution of fossil fuels with renewable energy and clean electricity;
(4) Carbon emissions from “two high” projects that are reduced through other means, and which are monitorable, statistically quantifiable, and subject to verification.
Article 4. Alternative sources shall meet the following requirements:
(1) Carbon emission reductions generated by enterprises above designated size after January 1, 2021. For capacity‑integration projects where all replacement sources originate within the same industry, such replacement sources may include enterprises below the designated size.
(2) Carbon emission reduction credits generated within the administrative territory of Shandong Province.
Article 5: For construction projects, alternative standards shall be determined according to industry classification, and the carbon emission reduction substitution system shall be strictly enforced. Carbon emissions shall be calculated in accordance with the “Pilot Technical Guidelines for Environmental Impact Assessment of Carbon Emissions from Key Industry Construction Projects (Trial).”
(1) The total carbon emission accounting method for construction projects is as follows:
Total carbon emissions = Carbon emissions from fuel combustion + Carbon emissions from industrial production processes + Carbon emissions from electricity and heat
Among these, E_fuel combustion, E_industrial processes, and E_electricity and heat refer respectively to the carbon emissions from fuel combustion, industrial production processes, and net purchased electricity and heat.
(2) The calculation method for the substitution quantity Q is as follows:
Q = E carbon total × H
Among these, H denotes the industry coefficient. For cement, refining and petrochemicals, electrolytic aluminum, and coal-fired power (excluding back-pressure cogeneration) projects, the industry coefficient H is 1.5; for steel, coking, ferroalloys, calcium carbide, lime, methanol, nitrogen fertilizers, acetic acid, chlor-alkali, architectural ceramics, flat glass, asphalt waterproofing materials, and back-pressure cogeneration projects, the industry coefficient H is 1.2.
(3) The carbon emission reduction achieved by the alternative source shall be calculated as the average of its actual carbon emissions over the preceding three years (for alternative sources that are small-scale enterprises, the calculation shall be based on energy consumption data from environmental statistics). The calculation method for Q is as follows:
, i=1,2,3.
Here, Qi denotes the actual carbon emissions for the year. Qreduction ≥ Q.
Article 6: In accordance with the pilot work plan of the Ministry of Ecology and Environment for conducting environmental impact assessments of carbon emissions from key-sector construction projects, the pilot program will be implemented in our province by the end of June 2022 in the steel (ironmaking and steelmaking) and chemical (acetic acid production within organic chemical raw material manufacturing) industries. Following July 1, 2022, the pilot experience will be summarized and the approach will be fully rolled out nationwide.
Article 7: Carbon emission reduction and substitution shall be incorporated into environmental impact assessment management. In accordance with the relevant approval authorities, ecological and environmental departments at or above the municipal level shall review and certify the amount of carbon emissions reduced. The review shall cover whether the calculations of carbon emissions for the project and the alternative sources are scientific and accurate, whether the alternative sources are genuine and feasible, and whether the supporting documentation is complete and valid.
Article 8: If, due to adjustments in scale, technology, or other factors, a project developer’s carbon emissions increase, it shall secure equivalent replacement sources to offset the additional emissions.
Article 9: If the carbon emission reduction from alternative sources has not been secured, the construction project shall not be put into operation.
Article 10: The project developer shall, in accordance with the principles of objectivity and impartiality, diligently organize the preparation and accounting of carbon emission reduction and substitution plans, and shall be responsible for the authenticity of the substitution sources.
Article 11: If a project proponent or a third-party agency obtains approval through improper means, such as repeated substitution or the submission of false materials, the reviewing authority shall impose sanctions in accordance with the relevant provisions of the Environmental Impact Assessment Law of the People’s Republic of China and the Administrative Licensing Law of the People’s Republic of China.
Article 12: Ecological and environmental authorities at all levels shall strengthen the review, oversight, and management of “two high” projects; establish tiered, dynamic registries for the review and management of carbon emission reduction and replacement indicators; and incorporate carbon emission reduction and replacement into their annual ecological and environmental enforcement plans, thereby promoting effective coordination between regulatory oversight and law enforcement and ensuring closed-loop management.
Article 13: This Measures shall be interpreted by the Provincial Department of Ecology and Environment.
Article 14 This Measures shall enter into force as of the date of its issuance.